Aqueous / Aqueous + Solvents Feeds.
1000ml of water evaporation/hr at max. drying air flow rate in insulated condition / Min. Spray drying from 0.1 ltr. Batch
Ambient to 250° C; Accuracy ± 10 C In steps of 0.10 C through PLC
3.0 kw
85 Nm3 /hr; 0 to –250mm of water column vacuum with variable frequency drive; in steps of 1% of capacity; controlled through VFD Controlled PLC.
0.25 HP x 2700 rpm 3 phase FLP – Motor with Single Phase 230V AC input & Three Phase 230V AC Output.
1250ml/ hr with 3mm ID tube with variable speed control in steps of 1% of pump capacity controlled through PLC
Co- current – 0.7mm, two fluid spray nozzle with loose orifice tips of 0.5mm, 1.0mm, 1.2mm and 1.5mm.
Fitted on Co- current nozzle with variable stroke interval through PLC
| Air Pressure Regulator Cum Filter for Spray Atomization | Janatics Make 0 - 10 kg/cm2. |
|---|---|
| Air Inlet Temp | Amb to 250°c. |
| Drying Air Input | 30 to 110 Nm3/hr. |
| Power Supply | Single Phase 220V, 50Hz |
| Max Current Drawn | 8 to 12 Amps totally. |
| Spray Orifice | 0.5/0.7/ 1.0/1.2/1.5 mm. |
| Power Supply | 220 / 240v-50 Hz single phase - 8 Amps. |
| Dimensions | 1200 x 500 x 600 mm (HxWxD) |
| Unit Wt | 60 kg. |
| Materials of Construction | |
| Main Body (Stand) | SS 316 – with dull GMP pharmaceutical external finish by glass bead shot blasting, Internally buffed to M-I dead mirror finish. |
| Air Heater Body (Flame proof heaters) | SS 316 |
| Air Heater Element | Incolloy 800 |
| Product Receivers, Collection bottle, Bag Filter | Borosilicate glass; annealed- stress relieved – spark tested |
| Threaded Couplers | Pure Teflon |
| Connecting Tubing | Alkathene Tubing |
| Cover of Product Receivers | Pure Teflon |
| Adjustable Support Stand for Receiver | Aluminum |
| Tube for Peristaltic Pump | Silicon Tubing |
| Scrubber Medii | 3 micron Antistatic Nylon Washable |
| Fresh Air Filter | Prefilter – 5 microns, Hepa Filter – 0.3 microns |
| All Sealing gaskets & ‘O’ Rings | Teflon / Silicon |
| Built In Control System | |
| PLC based system with RS 485 port with LCD display & annunciation Panel with audio visual indications with two way communication between Touchscreen & computer configuration. | |
| Variable Frequency Drive for Aspirator Motor | |
| The PLC circuit will with 24V power supply for Input interrogation & for powering DC Relays. | |
| ELCB protection is provided | |
| * 2 Pole ELCB for Mains Incoming 220V- Single Phase Supply. | |
| * 2 Pole MCB for Elect. Heater. | |
| Control Panel is provided with 1 no. isolation relay. | |
| SSR is provided for 3.0 kw Elect. Heater. | |
| 2nos. Temperature transmitters are provided for PT 100 resistance input & output 4 -20 MA for inlet/outlet temp control. | |
| The system is provided with RS 485 for data logging of inlet/outlet temp; hot air flow rate; feed pump flow rate | |
| Overall Dimensions | |
| Main Spray Drier - "On lab table 1200mm x 500mm x 600 mm (H x W x D)" | |
| Fresh Air Pre + Hepa Filter - "Below lab table 400mm x 400mm x 500 mm (H x W x D)" | |
| Weight of the System | |
| Main Spray Drier Complete - 60 k | |
| Fresh Air Pre. + Hepa Filter - 10kg | |
| ie Total Shipping Wt - 70kg |
